To set out the positions of the vertical
reinforcing steels (rebar - starter bars ) enter each wall by panel, then opening, then
panel, opening etc to end.
Click on tape at measurements to add new panel or opening to wall. Click the red cross to delete panels/openings.
Click Edit to edit individual walls. Click 'Next Wall' to add a new wall.
Click 'Calculate Rebar Map' to
generate running measurements for rebar starters. The Rebar Map will place starters
at each corner/end, beside each opening, at centres equal to or less than max
centers, and in the block core centers. Click Demo for a
walkthrough demonstration
|
|
|
Max Centres
Next Wall 
 |
| 8 |
1'4 |
2' |
2'8 |
3'4 |
4' |
4'8 |
5'4 |
6' |
6'8 |
7'4 |
8' |
8'8 |
9'4 |
10' |
10'8 |
11'4 |
12' |
12'8 |
13'4 |
14' |
14'8 |
15'4 |
16' |
16'8 |
17'4 |
18' |
18'8 |
19'4 |
20' |
20'8 |
21'4 |
22' |
22'8 |
23'4 |
24' |
24'8 |
25'4 |
26' |
26'8 |
27'4 |
28' |
28'8 |
29'4 |
30' |
|
 Print Rebar Map
 Back To Top
If you've benefited from this free service, please consider a small donation to The Fred Hollows Foundation
|
Contact Me
|
Masonry Construction Specialists
Port Douglas - Mossman - Cairns Australia
ph: 0400 508 558
|
Greg Tarrant
ph: Australia +61 7 40987645
Mob: Hanoi +84 1676347413
Your Own Website? Tips an Traps to Avoid
Wonga Beach Q.L.D. Australia
Questions or Suggestions? Email
 or ph: +61 7 40987645
ALWAYS CHECK WITH YOUR LOCAL BUILDING AUTHORITY BEFORE LAYING OUT
OR BUILDING ANYTHING
AND FOLLOW ALL LOCAL CODES. VERIFY ALL DIMENSIONS AND
ANGLES BEFORE CONSTRUCTION
Disclaimer |
Privacy
|