|
|
 Tell a Friend
 Bookmark!
|
|
|
Match Off-cuts to Eliminate Waste!
|
|
Raker sets out all the cut blocks in a raking wall, matching the off-cuts and positioning the bond beams ( if any ) for easy placement of vertical reinforcing steels (droppers). This system is very accurate and extremely fast, compared to the old 'stick and string' method. By slightly altering the height of the rake, you can optimize offcut matching, often saving half your cutting. Enter length to apex, angle, corner / end type, bond and bond beam specifications and Raker generates a cut sheet listing all the blocks in the rake.
|
If you've benefited from this free service, please consider a small donation to
Please help promote this free service - Tell a Friend
Wonga Beach Q.L.D. Australia
Questions or Suggestions? ph: +61 7 40987645
ALWAYS CHECK WITH YOUR LOCAL BUILDING AUTHORITY BEFORE LAYING OUT
OR BUILDING ANYTHING
AND FOLLOW ALL LOCAL CODES. VERIFY ALL DIMENSIONS AND
ANGLES BEFORE CONSTRUCTION
Disclaimer |
Privacy
|