Concrete Block Gable Cutting Calculator - Cut and number all blocks before laying - Match off-cuts
This calculator was first created and used in 1988.
Calculate all the cut block dimensions in a raking wall, matching the off-cuts and positioning the bond beams ( if any ) for easy placement of
vertical reinforcing steels (droppers). This system is very accurate and extremely fast, compared to the old 'stick and string' method.
By slightly altering the height of the rake, you can optimize off-cut matching, often saving half your cutting.
Enter length to apex, angle, corner / end type, bond and bond beam specifications to generate a cut sheet listing all the blocks in the rake.
The diagram above will display the selected end, corner, bond and bond beam settings.
Mark and cut the blocks first, numbering cut and off-cut. Then it's easy to lay the blocks up the rake by number.
The cut sizes are very accurate, so it's easy to keep the rake line straight without a string line.
If you can't build the high end corner to the top of the rake, for the line, it's better not to use one.
As ascending courses have less perp joints, the rake will center itself if you keep bond.
Just keep gauge and bond and you'll be amazed how straight and accurate the rake ends up.
With 2 bond beam courses, the second course bond is staggered forward, so the core centers line up vertically,
allowing easy placement of vertical reinforcing steels.
You can combine this Gable Cutting System with the Circular Wall System
to easily build curved or circular raking walls.
Neither system requires a string line, so they combine easily.
You can also use the Templateless Arch System
to build arches or bulls-eyes in your circular raking wall.
If you'd like more detailed info, please contact us ( ph: Australia +61 7 40987645 )
If you're cutting concrete, stone or ANYTHING
and there's DUST - DON'T TAKE THE RISK
Don't cut it, or cut it wet so there's NO DUST
- Silicosis Sucks