Members
Running Centres @
° - Pitch
- Click lists to format vertically.
Mark-out
Running Centres Level
Mark-out
Vertical Lengths (Heights)
Mark-out
Use this calculator to create a list of correct centers on a given angle, to match centers level (the base of the diagram).
Enter
Centers Level, total
Length Level and
Angle or
Pitch
to calculate and display the running list of measurements.
Mark out this running list up the angle, so the points are exactly plumb (vertical) above the entered
Centers Level below.
Click
Angle or
Pitch to swap between Angle and Pitch entries.
Drag slider controls to animate diagram, changing scale, centers and angle or pitch.
If the first member is an odd measurement from the start of the rake (not equal to centers level), enter its
Start at (Level) measurement to adjust results.
If you're cutting concrete, stone or
ANYTHING and there's
DUST - DON'T TAKE THE RISK
Don't cut it, or cut it wet so there's
NO DUST -
Silicosis Sucks
What do we think? - They're 2 different things:
A
Meter is a device to measure things - like a Volt Meter or a Parking Meter
A
Metre is about 3'-3~3/8"
Although diameter and perimeter as measurements - don't seem to fit very well
If the US ever goes Metric, you'll be able to use a Meter to measure Meters - A Meter Meter
All Imperial inputs and dimensions are actual physical finished sizes (unless otherwise noted)
All Metric Inputs in Millimetres (unless otherwise noted)
If you've benefited from this free service please consider supporting
Blue Dragon Children's Foundation
