The main Navigation tabs at top of each page are Metric - inputs in millimeters (mm) For Inch versions,
directly under the main tab is a smaller 'Inch' tab for the Feet and Inch version.
Drop Down Menus have M for Metric Versions.
For larger size Full Scale Templates, enter Length longer than selected page size to see multi page options.
Page Size
The holes are spaced so the gaps between them (and the gaps at both ends) are equal.
Enter a measurement in 'Ends Set In' to start the spacing at this point in from each end.
Hit the Full Scale button to draw the diagram at 100% scale, print, cut and use as a template to mark the holes out.
Full scale will work up to length 36", and can be poster printed or printed to an A0 size page.
See Printing Help for large size printing options.
?
Select output Fraction Precision, Decimal Inch or Metric mm. Select and Re-Calculate to display.
Fraction Precision
All Inch inputs and dimensions are actual physical finished sizes(unless otherwise noted)
All Metric Inputs in Millimetres(unless otherwise noted)
If you're cutting blocks, concrete, stone or ANYTHING and there's DUST - DON'T TAKE THE RISK
Don't cut it, or cut it wet so there's NO DUST - Silicosis Sucks
And if you're cutting wet, wear a mask - theres dust in the spray mist too!
How should we spell it?
Results
What do we think? - They're 2 different things:
A Meter is a device to measure things - like a Volt Meter or a Parking Meter
A Metre is about 3'-3~3/8"
Although diameter and perimeter as measurements - don't seem to fit very well
If the US ever goes Metric, you'll be able to use a Meter to measure Meters - A Meter Meter
(And when we go back to the moon, let's go Metric, ay?)
Built something using our calculators?
Please Send Photos!See examples
Built something using this site?
Please Send Photos! See Examples
blocklayer.com
If you've benefited from this free service please consider supporting:
Inch or Metric?👈
The main Navigation tabs at top of each page are Metric - inputs in millimeters (mm)
Directly under the main tab is a smaller 'Inch' tab for the Feet and Inch version.
Drop Down Menus have M for Metric Versions.