Soffit Drop Calculator
Calculate distance from top of wall to under soffit (Soffit Drop) and Floor Level to Soffit.
Top Fascia to Soffit
measurement is from top of fascia (under roof sheeting) to the bottom side of the soffit sheeting.
The calculated Soffit Drop
is the measurement from top of wall vertically down to the underside of soffit sheeting.
The Wall Top to Rafter Bottom
measurement is from top of wall vertically down to a point level with the bottom outside edge of the rafter (not including Fascia).
Need these calculations on-site? Try the site with a Smart Phone or Tablet. With a phone or tablet, you can directly measure angles for input to the Roofing and Pitch Angle calculator apps.
Lay the device on an incline and tap to measure angle. Tap again to capture angle and auto calculate roof, pitch, angles etc.
Hit the Speech
button and your device will repeatedly speak the current measured angle, so you don't need to see the screen to find the angle.
The buttons appear automatically when you visit with a device capable of pitch measurement.
If you're cutting blocks, concrete, stone or ANYTHING
and there's DUST - DON'T TAKE THE RISK
Don't cut it, or cut it wet so there's NO DUST
- Silicosis Sucks
And if you're cutting wet, wear a mask - theres dust in the spray mist too!
Built something using our calculators?
Please Send Photos!
Please help promote this free service
Tell a Friend about this site!
Create PDF to print diagrams on this page.
Printing Help (new window)
Copy all diagrams on this page to bottom of page - Make multiple copies to Print or Compare.
View page on Phone via QR Code (Not current calculation result)
All calculators on this site are geometric only.
If you've benefited from this free service please consider supporting
Check relevant local regulations for appropriate sizes, spacings and all engineering requirements.
Copyright © 2020 - blocklayer.com