The main Navigation tabs at top of each page are Metric - inputs in millimeters (mm) For Inch versions,
directly under the main tab is a smaller 'Inch' tab for the Feet and Inch version.
Drop Down Menus have M for Metric Versions.
Set Bevel Gauge directly from phone or tablet screen. Roof Angles and Rafter Plumb-Cuts.
Visit this page on your Phone to directly measure pitch and angles. With a mobile device, a button will appear.
Tap the button to start measuring and lay your device on an angle (roof) to measure pitch and angle and animate the diagram.
While measuring, tap to hear the spoken angle continuously as it changes.
?
Select output Fraction Precision, Decimal Inch or Metric mm. Select and Re-Calculate to display.
Fraction Precision
All Inch inputs and dimensions are actual physical finished sizes(unless otherwise noted)
All Metric Inputs in Millimetres(unless otherwise noted)
If you're cutting blocks, concrete, stone or ANYTHING and there's DUST - DON'T TAKE THE RISK
Don't cut it, or cut it wet so there's NO DUST - Silicosis Sucks
And if you're cutting wet, wear a mask - theres dust in the spray mist too!
How should we spell it?
Results
What do we think? - They're 2 different things:
A Meter is a device to measure things - like a Volt Meter or a Parking Meter
A Metre is about 3'-3~3/8"
Although diameter and perimeter as measurements - don't seem to fit very well
If the US ever goes Metric, you'll be able to use a Meter to measure Meters - A Meter Meter
(And when we go back to the moon, let's go Metric, ay?)
Built something using our calculators?
Please Send Photos!See examples
Built something using this site?
Please Send Photos! See Examples
blocklayer.com
If you've benefited from this free service please consider supporting:
Inch or Metric?👈
The main Navigation tabs at top of each page are Metric - inputs in millimeters (mm)
Directly under the main tab is a smaller 'Inch' tab for the Feet and Inch version.
Drop Down Menus have M for Metric Versions.